High efficiency. Low ripple & Noise. Output over voltage, short circuit and over current protected. Complies with SFX and SFX12V standard. Noise Killer (Thermal fan speed control function). 100% Hi Pot, ATE and burn in tested. Remote On / Off function. Passive Power Factor Correction. Complies with FCC part 15 subpart J Class B and CISPR 22 Class B. Re-settable power shutdown. Approved by UL, CSA, TUV and Nemko. This will also replace model FSP200-50SNV

AC Input:	230vAC
Temperature Range:	0°C to +25°C on full load, storage and shipping -20°C to +65°C
Humidity:	90% on operating and 95% on storage
Dielectric Withstand:	Input to frame ground 1800V AC for 1 second
Efficiency:	65%
Rise Time:	Less than 20ms on all outputs
Hold Up Time:	16.6ms minimum at 115vAC / 60Hz. 20ms minimum at 230vAC / 50Hz input voltage
Power Good Signal:	Power On delay time 100ms to 500ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current:	Not exceeding 3.5mA
MTBF :	100,000 hours at maximum load at +25°C
Dimension:	100 (L) x 125 (W) x 63 (H) mm
Output:	+5Vsb/Min. load 0.1A/Max. load 2.0A -12V/Min. load 0.0A/Max. load 0.5A +12V/Min. load 2A/Max. load 10A +5V/Min. load 1A/Max. load 16A +3.3V/Min. load 0.5A/Max. load 16.7A