Watt Power Solutions

Watt Power Solutions  Consultancy, Projects, Distribution, Design

HOME   PRODUCTS    MANUFACTURERS    NEWS    CONTACT US    SITE MAP    SEARCH

   

 

 

Product Finder Phihong

Product Finder Protek

Product Finder Sunny

Plugtop Adapters

Desktop Adapters

AC High Power

DC-DC Power Supply

Custom Power Supply

Open Frame

DIN Rail Power Supply

Inverters

Mini ITX Platform

PC Power Supplies

Open Frame/Car Adapters

 

 

 

 

A1 Watt Power Solutions (UK)
Welcome to the DC input ATX and Mini ITX Power Solution
MEGASTORE
All the power you will ever need.
All the following are available for new projects and new designs for volume applications. Some are available from our business partners for next day delivery. Some are only currently available from ourselves.             

WPPS55

55 Watts  Dims 160L x 45W x 18mmH
Input 11.4v-12.6vDC
Outputs +3.3v / 2.5A
              +5v / 5A
               -5v / 0.2A
               +12v / 1A
               -12v / 0.1A
              +5VSB / 1.5A
Outputs 1 x 20 way ATX Flying Cable
DC Input 2 Pin Molex Header

All WPPS DC-DC Converters are available in Kits of Parts.  Please see below for details.
The PDF attached shows a approximate cost to buy of the VIA EPIA Mini ITX embedded boards. It also shows a power supply suitability matrix. Not all DC-DC converters have been tried in all the motherboards shown, as suitability would have to be determined by the application. It is only a guide, as the DC-DC converter chosen is also determined not only by the motherboard, but also by  the number and type of peripheral drives.
Please note we do not sell 1 offs, unless they are for a prototype design, in a new application.

 

WPPS55B

55 Watts  Dims 160L x 45W x 18mmH
Input 11.4v-12.6vDC
Outputs +3.3v / 2.5A
              +5v / 5A
               -5v / 0.2A
               +12v / 1A
               -12v / 0.1A
              +5VSB / 1.5A
Outputs 1 x 20 way ATX Flying Cable
             1 x HD Connector
             1 x FD Connector
DC input 2.5mm Jack Skt

WPPS55A

55 Watts  Dims 170L x 37W x 14mmH
Input 11.4v-12.6vDC
Outputs +3.3v / 2.5A
              +5v / 5A
               -5v / 0.2A
               +12v / 1A
               -12v / 0.1A
              +5VSB / 1.5A
Outputs 1 x 20 way ATX
              1 x HD Connector
              1 x FD Connector
DC input 2.5mm Jack Skt
Similar to PW-60A

WPPS120          NEW

120 Watts Chassis Mounting Type Dims 120L x 60W x 22mmH 
Input 18v-28vDC
Outputs +3.3v / 5A
              +5v / 6A
               +12v / 5A
               -12v / 0.1A
              +5VSB / 2.5A
Outputs 1 x 20 way ATX
              1 x HD Connector
              1 x FD Connector
Optional DC Output lead to give 2 x FD and 2 x HD outputs.
DC input 4 Pin Kycon Power DIN

   

WPPS80

80 Watts Plug In Type
Dims 106L x 57W x 24mmH
Input 10.8v-20vDC
Outputs +3.3v / 5A
              +5v / 5A
               -5v / 0.2A
               +12v / 2.5A
               -12v / 0.1A
              +5VSB / 1A
Outputs 1 x 20 way Fixed ATX
              2 x HD Connector
              2 x FD Connector
DC input 2.5mm Jack Skt
Similar to PW-70, PW-70A

WPPS80A

80 Watts Plug In type
Dims 106L x 57W x 24mmH
Input 10.8v-20vDC
Outputs +3.3v / 5A
              +5v / 5A
               -5v / 0.2A
               +12v / 2.5A
               -5v / 0.2A
               -12v / 0.1A
              +5VSB / 1A
Outputs 1 x 20 way fixed ATX
              1 x HD Connector
              1 x FD Connector
              1 x 2 way +5v Output
DC input 2.5mm Jack Skt
Similar to PW-70, PW-70A

WPPS80B       NEW

80 Watts Chassis Mounting Type
126x 57W x 24mmH
Input 10.8v-20vDC
Mounting holes 118mm x 47mm
Input 10.8v-26vDC
Outputs +3.3v / 5A
              +5v / 5A
               -5v / 0.2A
               +12v / 2.5A
              -12v / 0.1A
               +5VSB / 1A
Outputs 1 x 20 way fixed ATX
              2 x HD Connector
              2 x FD Connector
              DC input 2.5mm Jack Skt
Similar to PW-70, PW-70A

ATX DC-DC Converter Kits, available in the following formats

55W Kit
Comprising of:
WPPS55 DC-DC Board
WPPS70120 12v 70 watt adapter
WPPS70-MIC Mains Lead
WPPS-DC Input DC cable assy.

55WA Kit
Comprising of:
WPPS55A DC-DC Board
WPPS70120 12v 70 watt adapter
WPPS70-MIC Mains Lead
WPPS80-OPC Output cable assy
.

55WB Kit
Comprising of:
WPPS55B DC-DC Board
WPPS70120 12v 70 watt adapter
WPPS70-MIC Mains Lead

80W Kit
Comprising of:
WPPS80 DC-DC Board
WPPS10019 19v 100 watt adapter
WPPS120-MIC Mains Lead
WPPS80-OPC Output Cable Assy

80WA Kit
Comprising of:
WPPS80A DC-DC Board
WPPS10019 19v 100 watt adapter
WPPS120-MIC Mains Lead
WPPS80-OPC Output Cable Assy

140W Kit
Comprising of:
WPPS140 DC-DC Board
WPPS15019 19v 150 watt adapter
WPPS140-MIC Mains Lead
DC1 Harness 20 Way
DC2 P4 Harness 4 Way

Automotive Adapters fixed Installation all "E" marked and approved for mobile use

WPPS07212  Fully E Marked

Auto Adapters for use with WPPS55, WPPS55A and WPPS55B DC-DC Converters.  Simple Power to Power DC-DC converters. Cigar Lighter input plug, output plug 2.5mm Jack centre positive. This is a quality unit, intended for in car fixed installation.  Two versions
WPPS07212 with 11-16vDC input  (12v Systems) , output 12vDC at 6 Amps
WPPS07212A with 12-32vDC input (24v Systems) , output 12vDC at 6 Amps

WPPS0712

WPPS0712A

WPPS12019CAR  Fully E Marked

Auto Adapters for use with WPPS80 , WPPS80A, WPPS80B, WPPS120 DC-DC Converters.   Cigar Lighter input plug, output plugs available SONY 4.3 x 6.5, 3 x 6.3, 2.5 x 5.5, 2.1 x 5.5, 1.7 x 4.75, 1.7 x 4mm. Can be polarised centre +ve or centre -ve. This is a quality unit, intended for in car fixed or portable applications. 
WPPS12019CAR with 9-32vDC input  15A Max (12v and 24v Systems) , output 19vDC at 6 Amps Max 120 watts

WPPS12019CAR

WPPSBRKT

Two sizes of metal mounting brackets are available for the WPPS07212 and  WPPS07212A.

WPPS07Bsizes of metal mounting brackets are available for the WPPS07212, WPPS07212A, WPPSBRKT  for the WPPS07212 and WPPS07212A
WPPS120BRKT for the WPPS1sizes of metal mounting brackets are available for the WPPS07212, WPPS07212A.

WPPS APS (Auto Power Sequencer)

This unit will smooth the input from your 12v Car battery. It will provide a clean, regulated 12vDC input into the DC-DC converter of your choice. It will work with the WPPS55, WPPS55A, WPPS55B, WPPS80, WPPS80A, and WPPS07212 . Provides power up and power down mode for your embedded PC mainboard. It will control and switch input currents of up to 7 Amps

Automotive DC-DC Converters with fully built in power up and power down mode

WPPS80C  80 watt Automotive Converter             

Interest is now invited for this new Automotive Converter. Supplied in a fully ventilated aluminium case and painted in a white satin finish. The unit provides full automotive 12vDC input range, and it will provide all ATX output voltages to a maximum power of 80 watts. It is supplied with a WPPS80 OPC cable assembly. There are outputs also for 2 x FD and 2 x HD. There is an additional +5vDC output for a 5vDC fan or something similar if required. The Automotive Converter provides full power up and power down sequencing for safe Mini ITX PC shutdown.

WPPS90M1                NEW

WPPS90M1 is an intelligent vehicle (car, boat, electric cart, etc) 12V DC-DC ATX PC power supply. Designed to provide power and to control the ON/OFF switch of a motherboard (PC) based on ignition status, The WPPS90M1 is a wide input (6-24V) vehicle or car DC-DC ATX power supply capable of surviving tough car engine cranks (down to 5.7V) as well as transient over-voltage situations.

The DC-DC converter has 8 user selectable micro-controller driven timing modes, allowing you to choose up to 8 ignition/shutdown vehicle / car timing schemes. By removing all user-selectable jumpers, it becomes a traditional PC PSU with no ignition control and it can be used in non-vehicle applications.


WPPS90M1 comes equipped with ATX, HDD and Floppy cable harness, jumpers, faston connectors and 2 pin cables for motherboard ON/OFF switch. Just connect it to your 12V or 24V car / boat / RV battery and power up your PC.

WPPS90M1 is form-factor compatible with all Casetronics Travla and Morex Cubid enclosures.

AMPX12/24      Fully E marked for mobile applications, CE Marked by request.

Professional Vehicle mounted 120 Watt ATX format power supply. Outputs +3.3vDC, +5vDC, +12vDC, -12vDC and +5vSB. Input versions either 12vDC or 24vDC vehicle types. Input Battery Connector Amphenol C16+1  3W+PE plug PG 9, Output Connector Amphenol C16-1 6W + PE socket PG13.5, additional isolated 12VDC output Amphenol C16-1  3W + PE PG9 connector for 12vDC Camera / LCD Connector. Cased Mobile Version with powder coated steel housing with anti vibration mountings. Cased Mobile Version 80/120 watts, Open Frame versions with fan cooling 150/180 watts.  Fully protected for vehicle installation, with load dump supressed versions of both. Enquiries Invited for design in applications. Open Frame version, dual pcb, for fan cooled 150 / 180w applications  1 off £307.
Cased Mobile Version, with e marking 80 / 120 watts fan less, as picture on the left,  1 off £524.

High Power DC input ATX output DC-DC Converters

WPPS25012 and WPPS30012

250 watt and 300 watt 12vDC Input.
P4 Version
Input  9vDC to 18vDC .Input and Output Isolated. Wrong Input Polarity Protection (Option). ATX 12V Pentium 4 Processor. Short Circuit, Over Voltage and Over Power Protected. OTP (Option). Thermal Fan Speed Control. CE Marked.








WPPS25024 and WPPS30024

250 watt and 300 watt 24vDC input.
P4 Version
Input  22vDC to 30vDC (+/-24vDC). CE Report. 250 watt Continuous Output
Efficiency 70%. Short Circuit Protection and Over Power protection
0-50*C Operating Temp. Range. Reliability 50K Hours at 25*C ambient
Size 150 x 150 x 86mmH







FSP180-50DL

180 Watt, 12vDC input.

1U Profile 12vDC input power supply, with ATX outputs and P4. Currently this is only for new designs, with purchasing potential of 50 pieces MOQ, MSQ.








WPPS100-ATX                              Max Power 100 watts
                                                       DC lead length 1.4 Mts
Input 90-264vAC                           
Outputs +3.3vDC/ 5A                 
              +5vDC / 5A
              +12vDC / 5A
              -12vDC / 1.5A
              +5vSB / 1A
Fitted with 1 x 20 way ATX Connector. DC lead length 1.4 mts Long. Custom DC leads can be quoted for, on application. cUL, TUV, FCC, CE approved. Class B EMC. Size 187mmL x 105mmW x 60mmH.


WPPS150-ATX 
                             Max Power 150 watts
                                                       
DC lead length 0.6 Mts
Input 90-264vAC
Outputs +3.3vDC / 6A
                +5vDC / 7A
                 +12vDC / 8A
                 -12vDC / 1.5A
                 +5VSB / 2A
DC Output lead fitted with 20 Way ATX connector. DC Lead length 0.6Mts. Also connected with 1 x HD and 1 x FD connector.  Custom DC lead can be supplied using a 20 way D Connector. cUL, TUV, FCC and CE approved. EMC Class B. Size 187mmL x 105mmW x 60mmH.

WPPS70-AT

Input 90-264vAC
Outputs  +5vDC / 7A  (9A Peak)
              +12vDC / 1.5A
              -12vDC / 0.3A
              +5VSB / 0.75A
DC output lead fitted with a 8 Pin Microphone screw locking connector or connector of your choice. UL, CSA, TUV, CE, FCC, PSE approvals.
Size L155 x W85 x H50mm
             

Open Frame AC-DC Power Supplies for Internal Power Applications

LPS-75-12

AC-DC Open Frame low cost power supply. This product could be used to power the WPPS55, WPPS55A, WPPS55B Mini ITX converters. Size 225 x 55 x 28mmH

LPS-100-15

AC-DC Open Frame low cost power supply. This product could be used to power the WPPS80 and WPPS80A Mini ITX converters. Size 222 x 62 x 35mmH

LPP-150-24

AC-DC Open Frame low cost power supply. This product could be used to power the WPPS140  Mini ITX converters (Volts Adjustment + / 10%). Size 222 x 75 x 41mmH

150 watt DC-AC Modified Sine Wave Inverter

A301-150-F3

12vDC Inverter, producing 230vAC at 150 watts (300 watts Peak)

A302-150-F3

24vDc Inverter, producing 230vAC at 150 watts (300 watts Peak)


Watt Power Solutions Limited, Unit  68 Henley Way, ELY, Cambridgeshire. CB7 4YJ.  UK.
Phone: +44 (0) 1353 667117, Fax: +44 (0) 1353 662717, Email:sales@watt-power.co.uk


Products | Online Store | News | Contact Us | Site Map | Partners | Links | Search

 PHOHE LINE:

 +44 (0) 1353 667 117

 

  Services

  WPS Services

  Projects 

 

  Info

  News

  Newsletter

  Approvals

  Safety Test Marks

  RoHS, WEEE

 

ONLINE STORE

  Find stock items.

  Enter Here

  Log in

 

             Information

 

  Other

  Contact Us

  Site Search

 

 Secure Payment

We accept all major Credit Cards using secure server.

Master Card, Solo, Switch, UK Maestro, Visa, Visa Debit, Delta, Visa Electron and  American Express. You can use your credit/debit card for ordering from our STORE or call us with your order on

0 1353 667 117

Home • Products • Online Store • News • Contact Us • Site Map • Partners • Links • Search

Copyright © 2006 Watt Power Solutions Limited all rights reserved.

WPS, Unit 68 Henley Way, Ely, Cambridgeshire, CB7 4YJ, United Kingdom, Tel: +44 (0) 1353 667 117