|
ENVIRONMENTAL
CONDITIONS: |
|
Cooling: |
Forced
Air-cooling, 80x80x25 mm Fan x 1 (Two Ball Bearing
mode) |
|
Operating Temperature: |
0°C ~ +60°C |
|
Operating Humidity: |
20%~85% RH. (Non
condensing) |
|
Storage Temperature: |
-20°C~+80°C |
|
Storage Humidity: |
10%~90% RH. (Non
condensing) |
|
Operating Altitude: |
10M Below Sea
level and 3000M Above Sea level |
|
DC INPUT
CHARACTERISTICS: |
|
Input connector type: |
25A/ 300V UL Approved 3-Pin Terminal |
|
Input Current: |
18A/15A/13A(max.) @Full Load & Low Line |
|
Inrush Current: |
Less than 10A Cold start @25°C ambient |
|
OVERALL
PERFORMANCE: |
|
Efficiency |
70% typical @110V
DC Full Load |
|
Hold up time |
≥16ms @ Full
load & Normal input voltage |
|
Power Good Signal |
TTL Compatible signal, on delay 100~500ms, off delay
1ms min |
|
Short Circuit Protection (SCP) |
All output equipped with SCP (shutdown and latch
off) |
|
Over Power Protection (OPP) |
Peak power protected to 130%±10% of continuous rated
power (shutdown and latch off) |
|
Over Voltage Protection (OVP) |
+5V, +12V & +3.3V |
|
RELIABILITY: |
|
MTBF (Mean Time Between Failure):
|
>50,000 hours
@max. Load, 48V DC & 25°C ambient |
|
Safety Standards: |
Meet UL60950 and
TüV EN60950 |
|
Safety Approved: |
CE |
|
EMI Compatibility (EMC) Standard: |
FCC Part 15
Class B, CISPER22 (EN55022) Class B (CE mark) |
|
Dielectric Withstand: |
Input to Output:
1500Vac for 1second |
|
Dielectric Withstand: |
Input to Frame
ground: 1500Vac for 1second |
|
Leakage Current: |
<0.75mA @250Vac |
|
Output Connector
specific: |
|
ATX 20 Pin: |
Molex39-01-2200 or equivalent |
|
+12V(P4) 4 pin x1: |
Molex 39-01-2040 or equivalent |
|
HDD, DVD 4 pin x8: |
Molex 8981-04P or equivalent |
|
FDD 4 pin x1: |
AMP171822-4 or equivalent |
|
Serial ATX: |
Molex 675820000 or equivalent |
|
Process 8 pin x1: |
Molex 39-01-2080 or equivalent |
|
Standard Output
Cable Length: |
| |
550mm |
